-40%

16-Way Data Acquisition Module System K Thermocouple Temperature Transmitter NEW

$ 66.05

Availability: 100 in stock
  • Return shipping will be paid by: Seller
  • Condition: New
  • Operating voltage:: DC8 to 24V
  • Communication speed:: 1200 ~ 19200bps
  • Transmission distance:: <1200M (19200bps)
  • All returns accepted: Returns Accepted
  • Measuring accuracy:: 0.5
  • Brand: Unbranded
  • Item must be returned within: 30 Days
  • Module address:: 00~255 software settings
  • Refund will be given as: Money back or replacement (buyer's choice)
  • MPN: Does Not Apply

    Description

    Description
    *NEW ARRIVAL*
    16-Way Data Acquisition Module Data Acquisition System K Thermocouple Temperature Transmitter
    Main Performance Profiles:
    The module can measure 16-way K graduation (or J, T, E, R, S, B, etc.) thermocouple signals, modules can be applied to temperature measurement system. Its output is 485 bus mode, communication protocol for MODBUS-RTU, which is convenient for PLC and configuration software applications.
    Module Main Parameters:
    - Operating voltage: DC8 to 24V, with power polarity protection, maximum 1200mW
    - Communication interface: RS-485 interface, two-wire system, + 15KV ESD protection
    - Communication speed: 1200 ~ 19200bps, software settings
    - Communication format: 1 bit start bit, 8-bit data bit, 1 bit stop bit, no parity bit
    - Transmission distance: <1200M (19200bps)
    - Module address: 00~255 software settings
    - Input signal: 16-way K graduation (or J, T, E, R, S, B) and other thermocouple signals
    - Measuring accuracy: 0.5
    - Measuring range: J:0 to 1200 DEG C; K:0 to 1300 DEG C; T:0 to 400; E:0 to 1000; R:0 to 1700; S:0 to 1768; B:0 to 1800 DEG c;
    - Input isolation: signal input and communication interface output isolation, isolation voltage 1000VDC
    - Sampling rate: 0.15S per channel, 8 channel cycle measurement
    - Installation: 35mm DIN rail clamping
    - Working conditions: -20 to 70℃, 35%~85%RH, no condensation
    Module RS-485 Communication Instructions:
    1. module uses standard protocol for MODBUS-RTU to facilitate the connection of PLC and configuration software.
    2. The bits of each byte in the protocol: 1 start bits, 8 data bits, no parity bits, and 1 bit stop bits. Using CRC-16 check.
    3. Function code 04H: read hold register, read measurement data
    Data start address range: 0100H to 010FH
    Data Description: read 32-bit data, low word in front, high word in back.
    Temperature data format description: one temperature data for 4 bytes, a total of 32bit (here 16 high, 0 has been), the actual temperature = reading measurement value /65536* range, the unit is: temperature
    Package Included:
    - 1 x Set of Data Acquisition Module
    Payment Terms
    1.We accept PayPal only.
    2.All major credit cards are accepted through secure payment processor PayPal.
    3.Payment must be received within 7 business days of auction closing.
    4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
    Shipping Terms
    - For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
    Return Terms
    1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
    2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
    3. We reserve the right to refuse any returns for objective reasons.
    Custom Duties & Taxes
    1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
    2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
    Feedback
    1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
    On Nov-27-20 at 20:20:13 PST, seller added the following information: