Jasic Pro MIG 200 Synergic Multi Process MIG/MMA/Lift TIG Inverter Welder

Description

NEW Jasic Pro MIG 200 Compact Synergic
Comes Complete With 3m Earth Lead, MIG torch, gas regulator.
Comes with a 2 year warrenty, and a further 3 years once you register it free online.
Key Features
Synergic control
Single PCB compact welding inverter
IGBT MIG/MMA/Lift TIG Multi Process
synergic Inverter for the professional user
Digital amp and voltmeter
Stable arc and reliable performance
Suitable for 0.6 to 1.0mm wires
Compact size, lightweight
and modern design
Burn back control
Ideal for production, site work & maintenance
Includes MIG torch, gas regulator, work return lead & clamp
High quality tactile rubber finish to mouldings and handle
5 year warranty
Technical Data
Input Voltage: AC 230V - 50/60 Hz
Input Power (kVA): 9.4
Voltage Range (V): 11-28
Current Range (A): 10 - 200
No-Load Voltage (V): 53
Duty Cycle: @ 40°C 200A @ 35%
Wire Spool Size: ø 200mm
Efficiency (%): 85
Power Factor: 0.7
Protection/Insulation Class: IP21S/F
Dimensions (mm): 485 x 185 x 370
Weight (Kg): 12.8
MMA
After connecting the welding leads as detailed you will needto switch the power switch on the back panel to “ON”Select MMA by switching to the MMA welding mode. Thereis voltage output at both output terminals. Set the amperage on the machine suitable for the electrode being used. Please see below a guide to amperages required. Ensure you check that you have the electrode polarity correct.
MIG/MAG
Connect the MIG torch leads as detailed above. Ensure that a suitable inert gas supply is connected.
Switch the power switch on the back panel to “ON”, the machine is started with the power LED on and the fan working.
Switch the MMA/MIG switch to MIG mode.
Open the gas valve of the cylinder, and adjust the gas regulator to obtain the desired flow rate.
Adjust the “voltage control knob in MIG” and “wire feed speed control knob in MIG” on the front panel of the machine to get the correct welding voltage and welding current.
Operate the torch Trigger, and welding can be carried out.
Where required adjust the burn-back time potentiometer (above the feed unit inside the machine) to get the proper electrode stick-out.
One second after the arc stops, the gas supply will be cut off.
Gas less MIG
The operation method is the same to MIG operation except
that there are no gas options.
After connecting the welding leads as detailed you will needto switch the power switch on the back panel to “ON”Select MMA by switching to the MMA welding mode. Thereis voltage output at both output terminals. Set the amperage on the machine suitable for the electrode being used. Please see below a guide to amperages required. Ensure you check that you have the electrode polarity correct. Switch the power switch on the back panel to “ON”, the machine is started with the power LED on and the fan working. Adjust the “voltage control knob in MIG” and “wire feed speed control knob in MIG” on the front panel of the machine to get the correct welding voltage and welding current. Where required adjust the burn-back time potentiometer (above the feed unit inside the machine) to get the proper elec